plastering machine

platering machine

Plasterwork building operations, primitive man in a simple manner with the houses built of sticks plastered with mud and was showing early evidence that the employee is one of the oldest crafts. Soon found a more durable and sightly material and dust or dirt employee to take place, and was approached in a very remote period plastering materials Compounding this is some amazing early plastering This fact was made clear in the present day we use it in its scientific structure that excels The undisturbed.

Perhaps the very first pyramids in Egypt, at least four thousand years ago contains plasterwork executed, and yet this time, tough and durable, current. Recent discoveries of this time plasterer's principal tools designed with those used today, virtually identical in format and purpose that has been finalized. His best work our way Egyptians lath, plaster, and set to float in a fair imitation of the time like plaster of Paris, calcined gypsum made from plaster, and plastering on reeds used these methods. Was introduced to strengthen the hair stuff, and under the somewhat over an inch thick.

A fine white lime plaster stucco very early use of the search in the history of Greek architecture, such has been found in Mycenae. Art more than five centuries before Christ in Greece had reached perfection, marble and plaster building was often even in some cases where the outer and inner temples was used to cover. The beauty of Greek history in this period had reached a very high degree the decorative painting, formed a magnificent land.

Equipment and materials
Plastering most common operations, relatively few tools and some materials are needed, but in all branches of skilled labor efficient devices will inherit a huge variety. Workers materials, etc. to create washes of color with different ingredients together laths, lath nails, lime, sand, hair, plaster of Paris, and a variety of cement, are.

Laths 

With brown coat oozing through the lath is seen from behind
A wooden floor or split wood laths are set according to the distance range from two to four or five feet in straight grained wood, usually narrow strips of fir Baltic or American, are. Laths are about an inch wide Lathing, and are made in three thicknesses, lath and a half (1/4 inch thick), and double (3/16 to 1/8 inch thick) single (3 / 8-1 / 2-inch thick). Thick laths latter, in which case the laths must be thick, rough, except where it would be subjected to, such as vertical partitions additional stress at work, and to stand Slim, Germany I should be used. Laths between them to form a plaster key usually about 3/8 of an inch are nailed with a space. Laths were formerly made all by hand. A large amount, however, are made by machinery and San laths, made by hand, those known as rent or riven laths known. (From riven) laths with the grain of the wood as a dividing line, giving the best results, and stronger and make the machine turn so as not responsible laths, fibers, some of which usually In the process of sawing rent cut. Wood Care should be taken to check the pH value, which attacks oak lime contains tannic acid, it can compromise bond strength.

With ends butted against each other three or four feet wide sector so as to break the joint Laths must be nailed. Breaking joints in such lathing, plaster for couples to break below trend line and a key is obtained and the wood frame provides for restraint. Each lath should be nailed at each end and a cross joist or stud wherever. Three inches wide (76 mm) or a fillet on top of the wood laths are then nailed to the center with double lath is nailed, that is, the counter should be lathed. This plaster a good key is to preserve. Sometimes battened responsive to wet and damp walls and plastering walls to form an air cavity are lathed.

Either in the form of wire or perforated sheets of metal, Lathing, fire and it is now widely used due to long-lasting quality. Best England Jhilmil, Bostwick, Lathing known to be different under various patents in the design of this metal, expanded metal lathing and very very kind. Two last names is also widely used in the United States. Lathing usually iron nails, cut, wrought or cast, and the better class of work they are galvanized to prevent rusting. Zinc nails sometimes used, but are expensive.

Lime 

Principally for internal use lime plaster that chalk, oyster shells or nearly pure limestone is calcined, and fat, pure, known as chalk or lime rich. Hydraulic lime mainly for outdoor work, plasterer used by. In case of a partially slaked used before being calcined perfect Slaking of lime is very important, as it will "blow" to the work position and the blister. The limestone building as soon as it starts running as it should be, and at least three weeks, lime and its use should be run through the middle of surgery. Due to time constraints Hydrated lime plaster mixed with generally used for modern construction.The housing industry is not required, plastering, a low-quality cost-effective to get finished.

Hair 

Hair through binding as used in plaster, and provides rigidity to the material. Before the development of the motor car was available as easily as traditional horsehair most commonly used binder was. As fiberglass strands in resin, to control and when it dries it is subject to flexing or any small cracks within the mortar used by the most similar functions in the hair.

Bell sold three properties which are usually specific types of hair, now, but the horse hair, which is sometimes substituted or mixed with lower characteristics of the ox hair. Good hair (short and long lengths in UK cattle and horse hair is used) should be long, and it protects against degradation because some left greasey (lanolin oil) very high alkaline plaster  presented at when. Before use it well to separate lumps, beaten, or must be touched. It is not so strong as an ox hair in the US, often goat hair, is used. Used in good quantity (up to 12 kg per metric cubic UK) two or three cubic feet of coarse hair to stuff a pound. Lime plaster reinforcement is common in the hair, and hair historic plaster and other types of organic fibers can be found. However, the external organic material moist lime leaves, especially, will degrade in moist environments. This problem gives rise to new lime is used in the POLYPROLENE fibers . In 2012, the UK Building Research Forum lime lime plaster looked at the potential for hair loss.

Manila hemp fiber hair has been used as an alternative. Manila hemp fiber slabs made with hair plastered to 195 pounds (88 kg), plaster, 150 pounds (68 kg), 145 lbs (66 kg), and 144 pounds of goat hair mixed with jute in the sisal hemp (65 broke kg). [Citation needed] Another test was made in the following manner. Two barrels of lime and sand mortar, containing a quantity of normal goat hair, and other Manila fiber was made up of equal proportions. After nine months, the barrels were opened in a dry basement. This hair is almost completely eaten away by the action of lime and mortar broke in and found many that were easily crumbled. Manila hemp mortar containing, on the other hand, showed great harmony, and undamaged except for some effort to pull hemp fiber. [Citation needed]

Methods 

Plasterer work of fine sand, for now, citing the sand, such a light color and fine texture is used when necessary or fine silver sand, foundry sand, as used. Medical centers in two parts, one part barium is added to cement and sand walls where X-rays are needed to block five. Or coating the concrete with a trowel if thrown or sprayed in liquid form on the surface of the sand to one part cement a "splash" when coat surfaces. It provides the key to render a better sucking the water from unsafe not only prevents concrete. Portland cement for exterior work on the resistance of the external characteristics of strength, durability, and the season is undoubtedly the best material. Cracking plaster coats need to be particularly strong and resistant, such as walls of a squash court, Sizing surface to increase the bond strength and flexibility of the application is first mixed with plaster.

1/2 to 3/4 inch thick first coat of render, and a part of the sand in the sand to one part cement ratio of the two, depending on the surface to be covered, is mixed. Shovel often mix ½ lime is added to make more pliable. The dampening of the surface to be coated, "screeds" render the two horizontal bands at head height and floor level around another one, are applied, the horizontal / vertical alignment of the finished signs for, then partly allowed to dry. Guides additional render finish and leave a rough flat surface as well as a process for laying concrete wall, a slightly higher level than screeds, and a "straight edge" (smooth) to use is provided for, Plasterer screeds uses. Or for a lower price over a rough surface can be dispensed with if certain screeds. Then fill large imperfections to remove or render a float (with a smooth flat wooden tool handles) is over with. The key is a strong need for some applications where the base with nails protruding from the use of a float is made from. Render the base with a sponge attached to a float on the wall is used to prepare the surface until the surface is free of defects.

Quality of work, or in the wall out of plumb is a large variation requires a thin "scratch" First, as described above render coat over a second coat is applied, the thickness render.

About 3/16 inch thick, or completion of the setting plaster coat should be wetted well before the end of the work is done with a hand trowel.worked for a time. The finishing plaster was usually two or three passes to get on is trowelled