Road cutting machine

Road cutting Machine

Pavement milling (Cold Planing, milling asphalt, or profiling) such a road, bridge, or a paved parking lot area is the process of removing at least part of the surface. Milling, surface and a depth to the surface for removal only removes sufficient thickness anywhere. Instead of milling a paved area is only for repaving the current level over a number of different reasons.

Recycling of road surface milling a road surface is one of the main reasons. Milling extensive floor to be used in the overall removed and the ground floor where recycling Today, it is used for.  for the milling of asphalt products which can be recycled asphalt pavement (RAP), is reclaimed aggregate and asphalt surfaces New cement (binder) or a recycling agent mixed with hot asphalt Mix Asphalt (pavement).  This resurfacing reduces impact on the environment is.

Milling a better driving experience and / or to extend the life of the road, away from the surface tension can be. Milling can eliminate some of the problems include:

Raveling: binder on the road and becoming loose from
Bleeding: the binder to the road surface (asphalt)
Rutting: low spots in the floor of the establishment as well as the direction of travel of the wheel
The shoving: a washboard effect transverse to the direction of travel
Ride quality: such as flowers, bumps's, sags, or recession, uneven road surfaces
Damage accidents and / or fire resulting in
It also controls all or part of the road can be used to change the height. The heights and other road structures such as the approval can be done to control: Stop, manhole and catch basin heights, shoulder and fence heights, and passed overhead shows  It also shields or to Camber can be changed or road, which can help with drainage for grade adjustment.


Special milling is often used along the highways in the Rumble strips can be used to form.  Instead, other methods such as rolling them, using milling, road surface hardening in the Rumble strips can be added at any time means.

DOWEL another example of the process of transition period in order to produce solid slap ROTO- milling head is to modify. Saw and jackhammer to cut the slots for the dowels is. DOWEL after placement, slot then usually with a non-shrinking concrete mix backfilled, and the floor is smooth recovery of diamonds are field. This special milling process is working during the traditional method is less time to create.